The Mobeye SISTM is a 2-channel module suitable for all analog sensors with an output value between 0 and (maximum) 10V, or 4-20mA. The measuring range can be adjusted to precise actual values ​​using the maximum value, conversion factor, and calibration value. The SISTM connects to the Mobeye Portal and (alarm) contacts via its internal 4G/2G communication module. The SISTM's inputs read the output values ​​and convert them into meaningful parameters, such as pressure in mbar or soil moisture in %. If (min./max.) limit values ​​have been set and are exceeded or fallen below, the contacts receive an alarm notification. The sensor values ​​are logged periodically and displayed in an online portal.

The Mobeye Call-Key is a control module for opening an electronic strike plate. This makes the MCK400 a user-friendly and secure access control solution for buildings with a single entrance door or gate, as well as for situations where access rights change frequently. When an authorized phone number calls the Mobeye Call-Key, the relay activates and opens the connected door or gate. There are no charges for the caller. Administrators assign access rights in the secure and user-friendly portal, either indefinitely or for specific time periods. The Mobeye Call-Key automatically retrieves these rights and stores them locally. The portal allows users to review who opened the door and when. No internet connection is required on-site; communication takes place via the internal 4G module and the Mobeye SIM card. The Call-Key is compatible with all electronic locks and strike plates that respond to a pulse or switching command.

The Mobeye CM4042 is an input/output module with four potential-free inputs, two relay outputs, an integrated 2G/4G communication module, and a connection for an optional external power supply. The CM-Gaurd-42 is ideal for monitoring systems and remotely starting and stopping devices. The outputs can be switched via SMS command or automatically after an alarm. The configuration offers numerous options for customizing this telemetry module to your specific requirements. In case of an alarm or status change, the CM4042 notifies contacts via app, phone call, SMS, or email.

The Mobeye CM4040 features four NO/NC inputs for monitoring sensors and signals. Any potential-free sensor can be connected. The detector can be powered entirely by batteries or by 12–24 V DC. In case of an alarm, the configured contacts are alerted via app, phone call, SMS, or email over the 4G network. A specific alarm text can be assigned to each input, so it is immediately clear what the fault is. Thanks to various configuration options, such as alarm messages per input, alarm delay, recovery messages with input-specific text, repeat messages, and test messages, the CM4040 can be easily adapted to individual requirements.

The Mobeye 4G Outdoor Alarm Perimeter Protection combines the reliable Optex Infinity detector with Mobeye battery powered communication technology. Ideal for site monitoring and burglary prevention. Anywhere where there is no power supply.

The Mobeye CM-Guard is the alarm module for monitoring analog sensors, signals and alarm situation reports. For example, from AED cabinets. Universal, reliable and compact. In the event of an alarm, the CM-Guard informs the contacts via app, phone call, SMS or email. In combination with the Call-Key MCK400, the CM4000 offers the perfect application for access control, monitoring doors, gate systems, cabinets or warehouses. The further developments of the CM-Guard fault detector are I/O detectors with alarm inputs and control outputs for measuring and controlling industrial processes.

The Mobeye Panic Button is a simple and effective alarm device. The CM4500 is often used in care, in authorities, reception areas or in industry. The effective personal protection for lone workers. At the push of a button, the set contacts can be notified via push message, voice call, SMS or email. Like all other Mobeye products, the emergency call button can forward the alarm to a private emergency call center or control room using the SIA DC09 protocol.

The Mobeye PowerGuard power failure detector is strong in simplicity and functionality. The use of the CM4100 for 24/7 monitoring of battery charging cabinets has increased significantly. This power monitor informs you in the event of a power failure or an activated sensor via push message, phone call, SMS or email.

The Mobeye CombiGuard monitors leaks, temperature, current and battery voltage. The CM4600 is often used in building management, especially when it comes to empty properties. In an alarm situation, the user receives notifications via push message, phone call, SMS or email.

The iCM41C Container Alarm is a standalone system that runs on a battery pack with a built-in communication module. Equipped with a passive infrared sensor, detection range 5 meters/90° angle, a 4G LTE-M + 2G EGSM quad band communication module, 2x NO/NC inputs and two tags for switching on and off, this all-in-one burglar alarm system offers optimal conditions for burglary detection. To ensure a reliable range of the mobile network, the antenna is located outside the metal part.

The Mobeye CM-Guard TwinLog (CML4055) is a voltage monitor, ideal for use as a battery guard for monitoring batteries and accumulators. Remote monitoring of battery voltages has become extremely important these days. In the event of an alarm, the CML4055 sends notifications via push message, phone call, SMS or email. It also logs the values ​​and sends them to the online portal for display as a graph, display and table.

The Mobeye fire communication kit consists of the tried and tested Mobeye alarm detector CM4100 and the Ei428RF relay module. Ei brand radio alarm detectors are coupled with the relay module, which is connected to the alarm detector by wire. This creates a fully-fledged fire alarm system for single and two-family houses or larger apartments over several floors that does not require complex cabling.

The Mobeye Smoke Detector with extra warning function. In the event of a fire, the siren will sound and a notification will be sent to the contact persons. The smoke detector that makes the difference for people, animals and possessions.

The Mobeye WaterGuard-FS is a highly reliable water detector for reporting changes in the water level. The alarm notifications are sent via a push message, telephone call, SMS or e-mail.

The Mobeye WaterGuard is an effective and user-friendly alarm device for detecting water-based liquids. In an alarm situation, it sends notifications via push message, telephone call, SMS or e-mail.

The Mobeye ThermoGuard is a reliable temperature monitor in a robust housing for outdoor use. In the event of an alarm, it sends notifications via push message, phone call, SMS or email. It also logs the temperature values ​​and sends them to the online portal for display as a graph and table.

The Mobeye ThermoGuard-TwinLog is a reliable and compact temperature monitor. In an alarm situation, it sends notifications via push message, call, SMS or e-mail. It also logs the temperature values and sends them to an online portal for visualisation as a graph, gauge or table.

The Mobeye ThermoGuard is a reliable detector for temperature alarms and possible power outages. The device monitors whether the set temperature limits are exceeded or not met. In the event of an alarm, it sends notifications via push message, phone call, SMS or email.