Rimtoplocks are reversible rim-mounted electric locks with a motorized bolt. When the magnetic sensors confirms the door is aligned with the frame, the 25mm bolt will automatically lock the door. After the scheduled time, the rimtoplock will lock the door back. The distance between the lock and the counter plate should be 5mm. An acoustic warning will beep if the door is not properly closed.
Access from the outside will be granted through access control or keys, while from the inside one can choose among knob, switch, push button or keys. It is usually installed on interior wooden or aluminum doors, but a protecting visor is available for outdoor installation.
With its small dimensions this electric strike it can be installed even in the thinnest door frames. Thanks to its wide range coil that works from 9-24V ac/dc (9-13V dc continuous duty) this strike is a multifunctional all-around talent that simplifies the variety of coil types and therefore it reduces purchasing planning as well as it leads to lower volume of stocks. The product range includes versions with all important features such as mechanical unlocking, hold-open or monitoring.
This electronic strike with only 16 mm width and the electronic control mechanism is a major technical advance. Due to its versatile coil that works from 6 to 28 V AC / DC 100% (automatic adjustment) as well as the optimum preload values, it is ideal for any type of installation.
In addition, the control mechanism limits the heating of the strike to 40° C. The strike unlocks flawlessly even with a preload of up to 50 kg and is characterized by a very low power consumption.
This is the first series of basic electric strikes that we have manufactured in O&C, and after 26 years, they have become our emblematic model. These electric strikes are ideal for simple installations such as portals or home door phones. They are available with fixed or adjustable keeper for either DIN right or left doors. Featuring a wide variety of functions and voltages, these strikes can be quickly unlocked through low power consumption.
Symmetrical electric strike are well-known on the market and that is why we have installed new improvements and have adjusted them to be as smaller and competitive as the requirements of the markets indicate. These strikes quickly unlock standard doors with low power consumption, they are 100% reversible and it features an adjustable keeper.
This strike is one of the smallest on the market, 100% reversible strike with only 16mm wide it perfectly fits on every narrow door profiles such as aluminum, wood or PVC. It contains radial keeper, so the installer does not have to cut the door frame to make it fit. Also, they are equipped with electronic protection to prevent damage to the access control system where they are connected and are easy to install because of the not polarized connections.
Designed for outdoor installations, this electric strike have a curved design of the base of the housing that allows the installation of locks where the separation between the latch and the first bolt is only 5mm. We have certificate them and a guarantee sealing of IP 54, meaning that is able to work in wet or dusty environments without any inconvenience.
In addition, the model that is monitored, operates by magnetism and it is an O&C patented system which ensures the insulation of the housing of the outside.
These electric strikes have been especially designed for armored doors secured by multipoint block where the separation between the latch and the first bolt is only 5 mm.
DC models are equipped with electronic protection in order to prevent damages to your access control system. This also represents an advantage for the installer as the connection is not polarized.
For heavier doors or doors that are continuously opening and closing, we decided to create a stronger and more resilient electric strike. We increased the hardness by adding more material in the housing assembly and strengthen footholds in 4 to better distribute efforts. You can configure the internal levers as you wish and increase their resistance for your needs. This electric strike is the only one in the market with double monitoring, one monitorizes if the door is closed or not and the other if the internal mechanism is activated or not.
These strikes are designed to be installed on emergency exit doors equipped with panic bars, allowing the access from the outside through an access control system. Designed to fit with the latch of the panic bars and connected in fire systems. Ideal for doors that require high level of reliability and safety, these strikes are usually connected with fire control system.
These electric strikes are the ideal solution for fire doors rated up to 120 min. (Certification FR-120) and are able to resist temperatures above 1150ºC.
Manufactured for left and right DIN openings doors and featuring a wide variety of functions and voltages, these strikes quickly unlock fire doors through low power consumption.
Those strikes have become the perfect solution for installations where high-performance is required, thanks to their compact manufacture and their high resistance to external and internal forces that can occur on during their useful life.
This series of electromagnetic locks are the perfect locking solution for emergency doors and access control systems with low power consumption. In case of power failure, all doors will automatically open, making possible for occupants to exit. They are available for mortise and rim installations with a wide range of brackets allowing an easy installation on any kind of outwards/inwards doors, glass doors and door frames.
This mini Maglock is the thinnest electromagnetic lock on the market. The main characteristic of this security element is the perfect balance between strength and its small size. Any attempt of manipulation will make immediately activate any security system.
You can find door holders in almost any hospitals, universities, public buildings, etc. everywhere where a fluid traffic of people is required. In case of fire, smoke or other emergency situation it helps other security systems to isolate different areas. Door holders can also be operated by manual release, closing the door for safety or convenience.
Shearlocks series are the ideal solution for glass, swing and sliding doors. They combine magnetic and mechanical force generating a massive holding force.
Shearlocks can be timed and connected to fire detectors, alarms, access control systems, emergencies, exit buttons, etc. When the door and the door frame are aligned, a magnetic sensor detects the alignment and the shearlock automatically block the door with two latches. If a locking defect happens after 5 attempts, the shearlock emits a warning sound until the system is reset.
Openers & Closers indicator lights combine design, robustness, and functionality, making them ideal for all acoustic or visual signals. Indicator lights helps people to know whether the door is open or not without having to pull the door. We dispose rim or mortise models ready to be used as soon as the fast installation is done and it has other accessories like flashing leds or acoustic signal that facilitates the traffic of persons through doors.
Openers & Closers Keypad allows to open two doors from only one terminal, and select two opening functions: Activates the lock for a preset time or activates the lock until re-entering the code. A 12 button matrix-encoded keypad for access control of one or two doors at the same time, very easy to install with high level of security. During blackouts all the data remind stored.
Our high quality door contacts are designed to provide hidden electric connections between the lock and the power supply (basically from the door to the door frame). They need to be mortised mounted where the hinges are.
This compact easy to install lock secures the door through a 16mm steel bolt which is activated by a solenoid.
A LED indicator will show the status of lock (open/close). The auto-lock function can be set after 0 to 9 seconds through the inbuilt timer.
Door loops are required when installing an electric lock on the door. They secure the connection of power from the wall to the door (on the hinges side) with an unobtrusive style and protects de wire from external agents. Our offer a high quality steel finish and are available in several lengths and mountings.
This push button, connected to a security system, is ideal for a intuitive quick release of emergency exits in case of fire. The text that appears on it is available in French, English, German, Spanish, Dutch and neutral.
You can choose between different models depending on the use and color of the push buttons; red for emergencies, green for evacuation, yellow for extinction shot and blue for extinction stop.
Our quality stain less steel buttons, mounted next to the door inside the building, quickly and safely allow door exit by activation/deactivating the electric locking device.
A LED light around the push button can be useful as guidance in dark environments, while an infrared sensor represents a more hygienic and modern option.
OPENERS AND CLOSERS is a family company based in Barcelona since 1989. Our president Mr. Francesc Andreu founded O&C with the aim to build superior door locks from an international point of view. Nowadays, his daughter and sons Carlota, Roger and Bernat run the company with the same spirit and passion while looking forward to new goals and achievements.
We started building our first electric strike in a small garage with the same passion we do today. In 1990 we took the most challenging road when our first international sale was settled in the UK. During the following 10 years, the activity increased allowing us to grow as a Company and having a good range of products to satisfy our clients’ needs. The sales began to expand all over the European Union.
New challenges followed in the year 2000 when we decided to sell our products nationally. It was the perfect time to build up our brand and aim for excellence. Even with the world financial crisis in 2008 and some difficulties we had to overcome, O&C kept developing new products and ideas with an incredible team effort.
The restructuring process began in 2012 bringing a positive situation across our entire company structure. We have made significant progress in our core business and we are still obsessed with product details and how to improve them.
This year, we are ready to take the leap with products that had been under development during the past years thanks to the experience we have acquired.
Plan your visit to the trade fair!