M.Kemal Ataturk Blv. 23-25
TR 35620 Cigli-Izmir
Contact
Mr. Dr. Erdem Dincsoy
  • 0090 532 414 30 99
  • 00902323767030
  • E-mail
Products and innovations

Introducing the new ThruScan sX-i

Introducing the new ThruScan sX-i
Innovation

Under the brand ThruScan®, the security metal detectors are being used in tens of thousands places. Elektral introduces its new walk through metal detector, the new ThruScan sX-i which is in full conformity with ECAC Std1-Std2-Std3, NIJ 0601.02 SMALL- MEDIUM-LARGE Objects, NIJ 0601.03, CE European Union Norms and is produced under ISO 9001: 2008 QMS.

It has ultra high sensitivity, excellent reliability, discrimination capability and high efficiency. The imunity of the detector to the environmental noise makes it suitable to re-used in all sorts of areas.

ELEKTRAL A.S. Thruscan Metal Detectors in the MEDIA CENTER

ThruScan
Author: ThruScan
ThruScan
Photographer: ThruScan
ThruScan
Photographer: ThruScan
The NEW ThruScan sX-i
Photographer: The NEW ThruScan sX-i
The NEW ThruScan sX-i
Photographer: The NEW ThruScan sX-i
The NEW ThruScan sX-i
Photographer: The NEW ThruScan sX-i
The NEW ThruScan sX-i
Photographer: The NEW ThruScan sX-i
The NEW ThruScan sX-i
Photographer: The NEW ThruScan sX-i
The NEW ThruScan sX-i
Photographer: The NEW ThruScan sX-i
The NEW ThruScan sX-i
Photographer: The NEW ThruScan sX-i
Product range

ThruScan® sX Walk Through Metal Detector

ThruScan® sX Walk Through Metal Detector

International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS

Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Stats can easily understand

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.

Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

No Interference between Zones and No False Alarms

Multi-Zone - 9 Real Matrix Detection Zones(Up/Middle/Down and Left/Middle/Right) - 9 Independent Detection Zones

Factory and User-Definable Programs

Protection Programming Password

Audio and Visual Alarm

Adjustable Sensitivity Zones

Displays Location of the Detected Metal Objects with Continuous LED Zone Indicators on Both Side Panels from top to bottom

Separate Sensitivity Settings for Different Detection Zones

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Detects Metals regardless their orientation

20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, - 7 Preset Security Programs

Automatic Frequency Selection Feature

Metal Density Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit

Human Health friendly Very Low Frequency VLF technology, No reacts to Pace Makers, Pregnant and Magnetic Media

Green/Red bi-colour track through LEDs, easily allows sight from distance

60 Persons/Minute and LED Alarm Indicators side panels

Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 64x128 Characters GLCD Screen

Real Time Environmental Magnetic Noise Level Display

10 Adjustable audio tones with 10 volume levels (enabling Mute Operation) Adjustable Alarm Duration

IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled

IP 44 (Optional IP 65) Protection Level (EN 60529). Optionally the IP level can be increased to IP65.

Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible)

Interference free Operation from other Electronic Equipment. Necessary altering precautions have been taken.

Four-digit changeable digital Pin Code and Mechanical Lock

Automatic Failure Display Function on GLCD with continuous self checking of key parameters (BITE - Built In test Equipment)

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution GLCD (Graphical Liquid Crystal Display)

5 Menu Languages, Standard menu in English, German, Spanish, Turkish and Arabic

Relay output for recording CCTV, Photo Recording, controlling turnstiles, etc.

Built Uninterrupted Power Supply (UPS) system backup for 2-12hrs

Battery ON/OFF Feature enabling Operation Without Mains

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 7/24 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm stagnate Metals and 200 cm distance moving.

Installation and Operation without interference between two detectors up to a distance of min. 5 cm

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings do not change when there is an electricity cut-off

No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices

All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No external units.

Strong plastic footers for sturdy placement and durable use.

Optional -SCADA Networking for Multiple Metal Detectors; Change settings by PC (Digital output for Network Connection)

Optional REAL-TIME VIDEO PROSECUTION UNIT enabling recording of Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images

Optional IRDA(Pilot) Remote Control Unit


Technical Features:                                                                            Package Dimensions (W x L x H)

Ambient Temperature: -20°C to +70°C                                                                   Box 1: 81 x 235 x 21 cm (65 kg)

Operating voltage: 70VAC – 270VAC / 50Hz - 60Hz                                           Box 2: 43 х 81 х 27 cm(14 Kg)

Power: 10W Stand By- 20W (Alarm)                                                                        Net Weight: 61 Kg

Net Passage: 74 x 68 x 200 cm            External: 85 x 68 x 220 cm                        Gross Weight: 79 Kg


Walk Through Body Scanner 

Elektral A.S. 

02323767300           elektral@elektral.com.tr

Product range

ThruScan s27-i Walk Through Metal Detector

ThruScan s27-i Walk Through Metal Detector

International norms (NILECJ-0601 L1-5/ NIJ 0601.02 Small Object Sensitivity 60529, EN 60068, EN60950 Class1 / IP44) In conformity with ECAC DOC 30 Standard 2, CE European Union Norms and produced under ISO 9001: 2015 QMS

Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

Multi-Zone - 27 Detection Zones (Up/Middle/Down and Left/Middle/ Right and Front/Rear)

Separate Sensitivity Settings for Different Detection Zones

Standard Preset JAILHOUSE / AIRPORT / MILITARY / POLICE PREMISES / SHOPPING MALL Security Levels

Whilst Normal Operation, displays IN/OUT Counters and Security Level on 64x128 GLCD without abbreviations so that Security Staff can easily understand

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.

Displays Location of the Detected Metal Objects with Continuous LED Zone Indicators on Both Side Panels from top to bottom

Can detect when tested both individually and in combination.

Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

No Interference between Zones and No False Alarm

Random Alarm Feature enables to scan some percentage of clean people

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Detects Metals regardless their orientation

20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, - 10 Preset International Security Programs

Automatic Frequency Selection Feature

Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media

Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels

Record Statistics of Operation Duration, number of visitors and alarms

Real Time Environmental Magnetic Noise Level Display

10 Adjustable audio tones with 10 volume levels (enabling Mute Operation) Adjustable Alarm Duration

IR Protection Feature enabling perfect low false alarm operation/

Continuous Detection Mode Selection Enabled

Optional IP 65 (EN 60529) protection

Five Digit Incoming/ Outgoing Alarm Counters (Visible/Invisible)

Interference free Operation from other Electronic Devices and Does not affect other Electronic Equipment. Necessary filtering precautions have been taken

Four-digit changeable digital Pin Code and Mechanical Lock

Automatic Failure Display Function on GLCD with continuous self checking of key parameters (BITE - Built In test Equipment)

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution GLCD (Graphical Liquid Crystal Display)

Different Menu Languages, Standard menu in English, German, Spanish, Turkish and Arabic

Relay output for recording CCTV, Photo Recording, controlling turnstiles, etc.

Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

Battery ON/OFF Feature enabling Operation Without Mains

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Built for 7/24 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects

Installation and Operation without interference between two detectors up to a distance of min. 5 cm

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings do not change when there is an electricity cut-off

No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices

Magnetic Field inside all passage area is 0.1 Gauss

All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No external units.

ABS Footers for sturdy placement and durable use.

Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 64x128 Characters GLCD Screen

Optional -SCADA Software-Controlled remote data communication and Networking of Multiple Metal Detectors; Software to Change settings by PC (Digital output for Network Connection

Optional REAL-TIME VIDEO PROSECUTION UNIT enabling recording of Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images

Optional IRDA(Pilot) Remote Control Unit

Detection functions have been tested with ECAC/NIJ/TSA Test Kits and Certified


Technical Features:                                                                      Package Dimensions (W x L x H):

Ambient Temperature: -20°C to +70°C                                                     Box 1: 81 x 235 x 21cm (65 kg)

Operating voltage:70 VAC – 270VAC / 50Hz - 60Hz                                 Box 2: 43 х 81 х 27 cm& (14 Kg)

Power: 10W Stand By- 20W (Alarm)                                                             Net Weight: 61 Kg

Net ­Passage: 74 x 68 x 200 cm  External: 85 x 68 x 220 cm                      Gross Weight: 79 Kg


High Technology Walk Through Metal Detector 

Elektral A.S. 

02323767300           elektral@elektral.com.tr

Product range

ThruScan s3 Walk Through Metal Detector

ThruScan s3 Walk Through Metal Detector

ThruScan s3 is the one of the basic model in our Walk Through Metal Detector range, with still highly effective and sensitive panels.

  • In conformity to CE , Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)
  • Conforms with European Norms NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2015 QMS
  • Electromagnetic Field-EMC conforms to International Health and Safety Norms
  • Detects all threat objects even those hidden with camouflage, concealed and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
  • ThruScan/s3 Multi-Zone - 3 Vertical Detection Zones (Left/Middle/Right)
  • Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
  • 10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 standard pre-set international security program
  • Auto Calibration (Automatically calibrates itself to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
  • Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.
  • No Interference between Zones and No False Alarms
  • Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
  • Gives Alarm to all threat objects detected in different Alarm Zones.
  • Can detect when tested both individually and in combination
  • Green/Red traffic control LEDs allow to enter 30 Persons / Min.
  • Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit
  • Metal Density Display by 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
  • Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen
  • Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.
  • Five Digit Incoming Counter (Visible/Invisible)
  • Alarm Counter (Five Digit)
  • IR Pass Sensor On / Off selection
  • Four-digit changeable digital Pin Code
  • Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
  • Reloading the factory default settings by one-touch button
  • Easy programming and monitoring with wide LCD display
  • 4 Menu Languages, Standard menu in English, German, Spanish and Turkish
  • OPTIONAL -Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains
  • No seasonal adjustment requirement thanks to its Digital Electronic System Processing(DSP)
  • Easy to mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
  • IP 20 (IP 65 Optional) Protection Level (EN 60529)
  • Manufactured for 24/7 Continuous Operation
  • 74 cm Net Passage Width and 200 cm Net Passage Height
  • Interference free Operation at Middle Level Sensitivity of 10 cm for stagnate Metals and 200 cm for moving.
  • Audio-Visual alarms are noticeable at a range of 2 meters
  • Micro-Processor Settings do not change when there is an electricity cut-off
  • Strong plastic footers for sturdy placement and durable use.
Product range

ThruScan® s6 Walk Through Metal Detector

ThruScan® s6 Walk Through Metal Detector

Conforms with European Norms NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2015 QMS

In conformity to CE , Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

Electromagnetic Field-EMC conforms to International Health and Safety Norms

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.

Gives Alarm to all threat objects detected in different Alarm Zones.

Detects all threat objects even those hidden with camouflage, concealed and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

ThruScan/s6 Multi-Zone - 6 Matrix Detection Zones (Up/Middle/Down and Left/Right)

10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 standard pre-set international security program

Auto Calibration (Automatically calibrates itself to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

No Interference between Zones and No False Alarms

Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Can detect when tested both individually and in combination.

Green/Red traffic control LEDs allow to enter 30 Persons / Min.

Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Digital Environment magnetic noise level and visual detection and Error Code Display on Wide 4x20 Characters LCD Screen

Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation.

Five Digit Incoming Counter (Visible/Invisible)

Alarm Counter (Five Digit)

IR Pass Sensor On / Off selection

Four-digit changeable digital Pin Code

Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)

Reloading the factory default settings by one-touch button

Easy programming and monitoring with wide LCD display

4 Menu Languages, Standard menu in English, German, Spanish and Turkish

OPTIONAL -Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains

No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

IP 20 (Optional IP 65) Protection Level (EN 60529)

Manufactured for 7/24 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects

Audio-Visual alarms are noticeable at a range of 2 meters

Micro-Processor Settings do not change when there is an electricity cut-off

Strong plastic footers for sturdy placement and durable use.


Technical Features:                                                                    Package Dimensions (W x L x H):

Ambient Temperature: -20°C to +70°C                                                            Box 1: 81 x 235 x 21 cm (65 kg)

Operating voltage:70 VAC – 270VAC / 50Hz - 60Hz                                     Box 2: 25 х 80 х 27 cm (12 kg)

Power: 10W Stand By- 20W (Alarm)                                                                  Net Weight: 60 Kg

Net Passage: 740x680x2000 mm   External: 850x680x2200 mm                Gross Weight: 77 Kg


Walk Through Metal Detector 

Elektral A.S. 

02323767300           elektral@elektral.com.tr

Product range

ThruScan® s9 Walk Through Metal Detector

ThruScan® s9 Walk Through Metal Detector

International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2015 QMS

Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

Multi-Zone - 9 Real Matrix Detection Zones (Up/Middle/Down and Left/Middle/Right)

Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities.

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators

Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Detects Metals regardless their orientation

10 sensitivity levels, 246 adjustable sensitivity steps at each + 1 Standard preset International Security Program

No Interference between Zones and No False Alarms

Can detect test objects both individually and in combination.

Metal Density-Mass by 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit

Can detect test objects both individually and in combination.

Human Health friendly Very Low Frequency VLF technology, No effect on Pace Makers, Pregnant and Magnetic Media

Green/Red bi-colour traffic LEDs easily allows sight from distance and LED Alarm Indicators on side panels

Operation Mode, Programming Parameters and Error Codes are displayed on Wide 4x20 Characters LCD Screen

Visual display of magnetic interference from environment.

10 Adjustable audio tones with 10 volume levels (enabling Mute Operation)

IP 44 (Optional IP 65) Protection Level (EN 60529)

Five Digit Incoming/ Outgoing traffic counter (can be made invisible) with 60 persons/Min speed

Alarms counted separately

Interference free operation from other Electronic Equipment. Necessary altering precautions have been taken.

Four-digit changeable digital Pin Code + Mechanical Lock

Automatic Failure Display Function with continuous self-checking of key parameters (BITE - Built In test Equipment)

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)

 

4 Menu Languages, Standard menu in English, German, Spanish and Turkish

Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

STANDARD Built-in Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains

No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 24/7 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm stagnate for Metals and 200 cm distance for moving.

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings do not change when there is an electricity cut-off

No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic device.

All Electronic Units (electronic unit, power supply, battery, adaptor etc...) are inside the Equipment. No external units.

Strong plastic footers for sturdy placement and durable use.

Resistant to Vibration & Impact

Optional -SCADA Networking of Multiple Metal Detectors; Change settings by PC (Digital output for Network Connection)

Manufactured using the latest technology and advanced components


Technical Features:                                                                  Package Dimensions (W x L x H):

Ambient Temperature: -20°C to +70°                                                         Box 1: 81 x 235 x 21 cm (65 kg)

Operating voltage: 70VAC – 270VAC / 50Hz - 60Hz                                Box 2: 25 х 80 х 27 cm (12 kg)

Power: 10W Stand By- 20W (Alarm)                                                           Net Weight: 60 Kg

Net Passage: 74 x 68 x 200 cm        External: 85 x 68 x 220 cm           Gross Weight: 77 Kg


Walk Through Metal Detector 

Elektral A.S. 

02323767300           elektral@elektral.com.tr

Product range

ThruScan sX-WP Walk Through Metal Detector

ThruScan sX-WP Walk Through Metal Detector

International norms (NILECJ-0601 L1-5/IP65/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2015 QMS

Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment).

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination.

Displays Location of the Detected Metal Objects with Continuous LED Zone Indicators on Both Side Panels from top to bottom

Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Detects Metals regardless their orientation

Multi-Zone - 9 Real Matrix Detection Zones(Up/Middle/Down and Left/Middle/Right)

Separate Sensitivity Settings for Different Detection Zones

No Interference between Zones and No False Alarms

20 sensitivity levels, 246 adjustable sensitivity steps at each, Pre-set NILECJ Sensitivity Program, - 7 Preset Security Programs

Automatic Frequency Selection Feature

Metal Density Strength Display by 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance

Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit

Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media

Digital Signal Processing and Diagnostics

Green/Red bi colour traffic LEDs easily allows sight from distance and LED Alarm Indicators on side panels

Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 64x128 Characters GLCD Screen

Real Time Environmental Magnetic Noise Level Display

10 Adjustable audio tones with 10 volume levels (enabling Mute Operation) Adjustable Alarm Duration

IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled

IP 65 Protection Level. Weather Proof, outdoor operation (EN 60529), 

Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) with a speed 60 persons/min.

Interference free Operation from other Electronic Equipment. Necessary filtering precautions have been taken.

Four-digit changeable digital Pin Code and Mechanical Lock

Automatic Failure Display Function on GLCD with continuous self checking of key parameters (BITE - Built In test Equipment)

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution GLCD (Graphical Liquid Crystal Display)

5 Menu Languages, Standard menu in English, German, Spanish, Turkish and Arabic

Relay output for recording CCTV, Photo Recording, controlling turnstiles, etc.&

Built-in Uninterrupted Power Supply (UPS) enabling 2 hours operation without mains

Battery ON/OFF Feature enabling Operation Without Mains

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 24/7 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm for stagnate Metals and 200 cm for moving

Installation and Operation without interference between two detectors up to a distance of min. 5 cm

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings do not change when there is an electricity cut-off

No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices

All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No external units.

Strong plastic footers for sturdy placement and durable use.

ABS Rain Shelter on top

Optional: ABS Protective footers for increased protection and strong fixing

Optional: Low voltage main supply

Optional -SCADA Networking of Multiple Metal Detectors; Change of settings by PC (Digital output for Network Connection)

Optional Real-Time Video Prosecution Unit enabling recording of Alarmed/All Visitors Pictures or video with time-stamp to SD Card ~30.000 Image

Optional IRDA(Pilot) Remote Control Unit


Technical Features:                                                                                     Package Dimensions (W x L x H):

Ambient Temperature: -20°C to +70°C                                                         Box 1: 81 x 235 x 21 cm (65 Kg)

Operating voltage: 70VAC – 270VAC / 50Hz - 60Hz                               Box 2: 43 x 81х27 cm (14 Kg)

Power: 10W Stand By- 20W (Alarm)                                                          Box 3: 62 х 101 х 12 cm (4 kg)

Net ­Passage: 74 x68 x200 cm                                                                    Net Weight: 63 Kg

External: 85 x68 x220 cm                                                                          Gross Weight: 83 Kg (3 boxes)


Water Proof Walk Through Metal Detector 

Elektral A.S. 

02323767300           elektral@elektral.

Product range

ThruScan® Hand Held Metal Detector

ThruScan®  Hand Held Metal Detector

Features
Alarm: Audio (Earphone-Vibration Optional) Visual LED indication

Battery: 1 pcs 9 V Ni-Mh 250 mAh (rechargeable and replaceable)

Charge Period: : First Charge ~15 hrs latter charges 10 hrs.

Charger: Mains: 220V AC 50Hz - 12V DC 110mA

Current: Stand by 3 mA

Battery Voltage Test: Audio-Visual Low Battery Indication for threshold operation levels.

Material : ABS

Operation : On/Off switch operation.

Note: Special design to prevent false alarm from walkie talkies (radio frequencies)

Test Object
Min. Distance
Pistol Browning 14
17 cm
Pistol C2 Model 75B
15 cm
Paper Blade (2 x 10 cm)
6 cm
Copper Tube(6cm)
5 cm
9 mm Bullet(Pistol)
5 cm
Razor Blade
5 cm
Cable(2x1.5mm-30cm)
3 cm

Technical Features                                                        Package Dimensions

Operation Voltage: 12V DC 110mA                                             Dimensions : 5 x 9 x 41 cm

Operation Temperature: -20ºC / + 70 ºC                                     Weight:~420 g    

Storage Temperature: -30ºC / + 75 ºC


Hand Held Metal DetectorElektral A.S.

+90 232 376 7300           elektral@elektral.com.tr

Product range

Video Prosecution Unit

Video Prosecution Unit

This Special Package consists of the DVR System Embedded to the WTMD Main Board, the Camera Assembly, Camera and the SD Card Storage Media as well as the TC Out Video Connection Sockets.

Alarmed visitors images are automatically captured with a time-stamp and saved in an SD Card.

The system allows recording of All Visitors/Alarmed Visitors Only with a time-stamp and queue number.

This package is only available with sX, s15-i and sX-i models.

Product range

ThruScan® dX Hand Held Metal Detector

ThruScan® dX Hand Held Metal Detector

Hand Held Metal Detector ThruScan dX
Features
Alarm: Audio (Earphone-Vibration Optional) Visual (5 Level LED Vu-Meter)

Battery :1 pcs 9 V Ni-Mh 250 mAh (rechargeable and replaceable)

Charge Period : First Charge ~15 hrs latter charges 10 hrs.

Charger :Mains: 220V AC 50Hz - 12V DC 110mA

Current : Stand by 5 mA, Alarm ~15 mA

Battery Voltage Test : Battery Level Display on 5 Level LED Vu-Meter Display at Start Up. Audio-Visual Low Battery Indication for below threshold operation levels.
Up time : 40 hrs Operation at 10% Alarm Ratio and 50 hrs Operation on Stand By with a single charge

Material : ABS

Standards : CE Compliance, EN61000-6-3, EN61000-6-1 (TS 2418 EN 61010–1)

Operation : Search Button Activation.

Sensitivity Adjustment : When in Operation touch button membrane keys (Up/Down) are used to increase and decrease the sensitivity (1st LED lowest sensitivity, 5th LED highest sensitivity).

Note: Special design to prevent false alarm from walkie talkies (radio frequencies)


Test Object
Min. Distance
9 mm MKE Pistol
17 cm
AM 7 (NILECJ Metal)
13 cm
AN 7 (NILECJ Metal)
12 cm
Paper Blade (2 x 13 cm)
10 cm
2 EUR Coin
9 cm
9 mm Bullet (rifle)
7 cm
Needle/Pin
2 cm

Technical Features                                                      Package Dimensions

Operation Voltage: 12V DC 110mA                                           Dimensions : 5 x 9 x 41 cm      

Operation Temperature : -20ºC / + 70 ºC                                Weight :~420 g

Storage Temperature : -30ºC / + 75 ºC


Hand Held Metal Detector 

Elektral A.S.

+90 232 376 7300           elektral@elektral.com.tr

Product range

ThruScan® dX-X Hand Held Metal Detector

ThruScan® dX-X Hand Held Metal Detector

Designed to detect weapons, knifes and other metallic threat objects made of magnetic and non-magnetic metals carried on people.

International Norms (NILECJ-0602.02 L1-5/IP53/EN60950 Class1), In Conformity to CE and in Compliance with EN61000-6-3, EN61000-6-1 being produced under ISO 9001:2015 QMS.

Conformity to ECAC(European Civil Aviation Conference) (Doc. 30) Latest Standards (TS 2418 EN 61010–1) Safety requirements for electrical equipment for measurement, control, and laboratory use (EN 61000–6.3)
Emission standard for residential, commercial and light-industrial environments (EN 61000-6.2) Immunity for industrial environments, Compliance with IEEE C 95.1 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio frequency Electromagnetic Fields, 3 kHz to 300 GHz Standard as per its Operation Frequency Limits

Peculiar Elinno Design

Can detect all ferromagnetic, para magnetic and geomagnetic metals. Does not give alarm to human body when magnetic/non magnetic or metals and/or alloys not carried

Auto Calibration (Automatically Calibrates itself to environment)

Human Health friendly Very Low Frequency VLF technology, does not affects to Pace Makers,Pregnant woman and Magnetic Media (Certified)

40 hrs Operation at 10% Alarm Ratio and 50 hrs Operation on Stand By with a single charge

Complete Set with 9 V NiMH Rechargeable Battery, 220 V AC Charger, Belt Holder and Wrist Stripe

Alarm Indication Modes can be; Visual LED Indication, Audio-Visual Indication and Vibration (Optional)

Earphone can be used for silent Operation Mode. Earphone socket is a Standard Supply and the Earphone itself is Optional. Audio Alarms can be heard from earphone when used.

5 Level LED Vu-Meter Audio-Visual Alarm indications

Sensitivity Adjustment with Visual LED Vu-Meter Display. When in operation, touch button membrane keys (Up/Down) are used to increase and decrease the sensitivity (1st LED lowest sensitivity, 5th LED highest sensitivity).

Very low consumption Stand-By 4 mA, max 13 mA at alarm.

Certified Safe for wearers of pace makers, Pregnant Women and Magnetic Storage Media

No false alarms caused by another Hand-Held Metal Detectors in operation min. 1 m distance Efficient control at heel level searches, no interference from rebar inside concrete floor. Considering the reference detection surfaces, there will be no sound or light alarm for caused by the rebar at a height of 30 cm.

The dX-X does not give alarm for (1 m±0,1 m)x(1 m±0,1 m) size 0,75 mm±0,13 mm thick iron sheets at a distance of 50 cm

Audio Alarm Tone change as per the distance of the detected objects

Produced with SMD Technology.

Made of impact resistant robust ABS Material against drop and crashes

Perfectly operates between -20°C and + 70 °C at 95% non-condensed humidity

Audio-Visual Low Battery Indication, 5 Level LED Vu-Meter Battery Level Display with Audio Indication. Battery can be changed by opening the battery compartment only. Battery can be charged easily without removing the battery using the charge adapter.

Protective circuitry design against reverse connection of the battery.

Battery can be replaced easily without using any tools.

The HHMD has an ergonomic design enabling continuous use and easy handling with one hand only.

Two detectors set to operate at maximum sensitivity levels does not interfere with each other at a distance of 50 cm

Does not interfere with DECT phones, mobile phones, etc. devices

Each equipment, has written Brand/Model Name and Serial No. information on it

Each equipment is being provided with a Brochure, Warranty Card and User’s Manual

2 Years Warranty and 10 Years Parts Supply Availability as per our “General Conditions of sales, Delivery & Warranty”


Test Object
Min. Distance
9 mm MKE Pistol
35 cm
AM 7 (NILECJ Metal)
27 cm
AN 7 (NILECJ Metal)
25 cm
Paper Blade (2 x 13 cm)
17 cm
2 EUR Coin
18 cm
9 mm Bullet (rifle)
15 cm
Needle/Pin
5 cm

Technical Features:                                                                       Package (w x l x h)

Operation Voltage: 9V – Alkaline or Ni-Mh Battery                                         Dimensions: 5 x 41 x 9 cm

Current: 4 mA Stand By- 13 mA Alarm                                                                Weight: ~ 420 gr.

Operation Temperature: -20°C - +70°C 95% non-condensed humidity            Gross Weight: ~ 450 gr.

Storage Temperature: -30°C - +75°C


Hand Held Metal DetectorElektral A.S.

+90 232 376 7300           elektral@elektral.com.tr

Product range

z ThruSCan QUEUE Barrier

z ThruSCan QUEUE Barrier


Chrome Plated material

90 cm height

9.5 kg approximate weight

3 meters long ribbon with 5 cm width 

The ribbon can be attached from 4 sides 

Special design to prevent tilt over

Product range

Under Vehicle Inspection Mirror

Under Vehicle Inspection Mirror

Aluminium rod, light design

Large 30 cm convex mirror

Galvanised, with rubber and metal protection

Parliament Blue electrostatic painted base

Battery-Flash light (4 spare AAA batteries )

Ergonometric handle / grip Special multi positioning wheels

Stainless material, 3 levels adjustment

Multi-position wheel

Product range

ThruSec Hand Held Metal Detector

ThruSec Hand Held Metal Detector

Alarm : Audio, Vibration (Earphone Optional) Visual LED indication

Green LED indicates operation and red LED alarm - yellow LED Low Battery

Battery :1 pcs 9 V Ni-Mh 250 mAh (rechargeable and replaceable) Optional

Charge Period : First Charge ~15 hrs latter charges 10 hrs.

Charger : Mains: 220V AC 50Hz - 12V DC 110mA

Current : Stand by 11 mA

Weight :~375 g

Dimensions : 43 x 85 x 415 mm

Operation Temperature : -10ºC / + 45 ºC

Storage Temperature : -20ºC / + 55 ºC

Material : ABS

Warranty : 1 Year (7 Years Parts Supply Availability) as per our “General Conditions of Sales, Delivery & Warranty”

Operation : On/OFF switch operation.


Economy Hand Held Metal Detector 

Elektral A.S.

+90 232 376 7300           elektral@elektral.com.tr

Product range

z ThruScan Metal Objects Sliding Table

z ThruScan Metal Objects Sliding Table

Object Sliding Table is a Must Have product for professional Security Checkpoint Concealed Weapons Detection applications. It is made of rugged ;ABS material or MDF lam used for WTMDs and its special design sliding part on the top provides ease of use and comfort for the visitors.

There are 2 alternative Metal Objects Sliding Tables:

REGULAR (portable, light and wide)

SLIM (Solid, sturdy, heavy, slim)

REGULAR Metal Objects Sliding Table

Material: ABS Plastics

Weight: 5.5 kg

Depth of tray: 8 cm.

Portable

Digital signage at front side

Light and easy to carry

Special inclined design tray

SLIM Metal Objects Sliding Table

Material: MDF laminate

Weight: 9 Kg

Depth of tray: 10 cm.

Digital warning sticker at front

Easy to carry

Special inclined design tray

Company news

Introducing The NEW ThruScan sX-i

Introducing The NEW ThruScan sX-i

Under the brand ThruScan®, our Security Metal Detectors are being used in tens of thousands places. During Security Essen 2018 we are introducing our new Walk Through Metal Detector, The NEW ThruScan sX-i which is in full conformity with ECAC Std1-Std2-Std3, NIJ 0601.02 SMALL- MEDIUM-LARGE Objects, NIJ 0601.03, CE European Union Norms and is produced under ISO 9001: 2008 QMS. It has Ultra High Sensitivity, Excellent Reliability, Discrimination Capability and High Efficiency. The imunity of the detector to the environmental noise makes it suitable to re used in all sorts of areas.

Company profile

Elektral is one of the top 3 Security Metal Detector manufacturers that can produce the most advanced Walk Through Metal Detectors (WTMD), Hand Held Metal Detectors (HHMD) and has achieved a number of awards. Our metal detectors operate with DSP (Digital Signal Processing) technology and VLF (Very Low Frequency). Elektral produces Security Walk Through Metal Detectors under the brand ThruScan with 7 different models of WTMD's and 4 different models of HHMD's. ThruScan® Metal Detectors have gained great Worldwide Reputation and Impressive References with the high quality and up to date technical features. With our OEM production for some of the World's famous Metal Detector Distributors in EUROPE, our products are being sold worldwide. Our production is in conformance with NILECJ 0601 / NIJ 0601.02 / NIJ 0601.03  American Standards, STAC, ECAC European Standards and complies with CE Norms and is being produced under ISO 9001:2015 QMS procedures.

Elektral, ThruScan Security Products