OmniTrax® is the fifth generation, covert outdoor perimeter security intrusion detection sensor that
generates an invisible radar detection field around buried sensor cables. If an intruder disturbs the field, an alarm is declared and the location of the intrusion is determined. Targets are detected
based on their conductivity, size and movement.

UltraWave is a volumetric perimeter intrusion detection system consisting of an all digital transmitter and receiver. The transmitter and receiver create an invisible detection zone that alerts when an intrusion occurs. µltraWave works reliably in extreme environments and provides networking for remote alarm reporting and configuration common to other Senstar sensors such as OmniTrax®, FlexPS™ and X-Field®. 

FlexZone is Senstar’s latest generation ranging fence-mounted sensor. FlexZone detects and locates any attempt to cut, climb or otherwise break through the fence. It accurately locates intrusions even when there are multiple simultaneous intrusions and in the presence of background environmental noise.

Advanced Digital Signal Processing (DSP) enables FlexZone to adapt to a wide variety of fence types. FlexZone builds upon Senstar’s 30 plus years of perimeter security experience to deliver a sensor that is simple to install, supports remote configuration and alarm reporting, and works reliably in the most harsh environments.

By monitoring the minute flexing of its sensor cable, FlexZone detects and locates intruders climbing, cutting or lifting the fence fabric. High-speed sampling ensures that the FlexZone processor captures a precise picture of the fence signal.

UltraLink Input/Output (I/O) modules are hardware components that provide a range of system integration options. UltraLink I/O modules connect to Senstar’s Silver Network™ and provide a range of I/O types, including outputs (relay, open-collector) and supervised dry-contact inputs. UltraLink outputs can be used to transmit alarms from Senstar’s family of networked sensors using only Senstar’s Network Manager (NM) software. For more sophisticated applications UltraLink I/O modules can be controlled by Senstar’s StarNeT™ 1000 Security Management System (SMS) or Alarm Integration Module (AIM) software.

Sophisticated security systems are increasingly being used to protect unattended critical infrastructure sites such as electrical substations and pipeline valve and compressor stations. Facility owners face the challenge of implementing centralized command and control using their available WAN/SCADA networks while still maintaining a local deterrent capability in the event of a network outage – all while minimizing maintenance costs.

The UltraLink Rugged Controller is the ideal complement to the use of Senstar sensors at unattended sites. It connects to installed security sensors and I/O devices and provides a standard Ethernet/IP-based interface for communication with the central Security Management System (SMS) using the facility’s own WAN/SCADA network.

The UltraLink Rugged Controller can be programmed to activate video recording and deterrence devices (lights, sirens, etc.) in response to sensor alarms or diagnostic events. Security is enhanced as the desired actions will occur even if network connection to the central SMS is temporarily lost.

To facilitate on-going maintenance, it provides a common network access point from which all configuration, calibration, and event log data can be viewed for Senstar sensors and I/O devices. This access point can be used both remotely over the WAN/SCADA network and locally by an on-site technician. Maintenance visits to the sites are reduced, as is the need to access individual sensors when site visits are required.